tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 1 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright led, ? 5 mm untinted non-diffused package description the tlcy61.. series is a clear, non-diffused 5 mm led for high end applications where supreme luminous intensity required. these lamps with clear untinted plastic case utilize the highly developed ultrabright alingap (as). the lens and the viewing angle is optimized to achieve best performance of light ou tput and visibility. product group and package data ? product group: led ?package: 5 mm ? product series: power ? angle of half intensity: 9 features ? untinted non-diffused lens ? utilizing ultrabright allngap (as) ? high luminous intensity ? high operating temperature: t j (chip junction temperature) up to 125 c for allngap devices ? luminous intensity and color categorized for each packing unit ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? outdoor led panels ? instrumentation and front panel indicators ? central high mounted stop lights (chmsl) for motor vehicles ? replaces incandescent lamps ? traffic signals ? light guide design note (1) driving the led in reverse direction is suitable for a short term application 19224 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. TLCY6100 yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas TLCY6100-as21 yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas tlcy6101-asz yellow 5750 - 20 000 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) tlcy610. parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb 85 c i f 50 ma surge forward current t p 10 s i fsm 1a power dissi pation p v 135 mw junction temperature t j 125 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c soldering temperature t 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 300 k/w
tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 2 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 2.0 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each bag (t here will be no mixing of two groups on each bag). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped in any one bag. in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) TLCY6100, tlcy6101, yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma TLCY6100 i v 3200 7500 - mcd tlcy6101 i v 5750 - 20 000 mcd dominant wavelength i f = 50 ma d 585 590 597 nm peak wavelength i f = 50 ma p - 593 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -17-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --3.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.1-nm/k luminous intensity classification group luminous intensity (mcd) standard min. max. bb 430 860 cc 575 1150 dd 750 1500 ee 1000 2000 ff 1350 2700 gg 1800 3600 hh 2400 4800 ii 3200 6400 kk 4300 8600 ll 5750 11 500 mm 7500 15 000 nn 10 000 20 000 pp 13 500 27 000 qq 18 000 36 000 rr 24 000 48 000 ss 32 000 64 000 tt 43 000 86 000 uu 57 500 115 000 color classification group dom. wavelength (nm) red yellow min. max. min. max. 0 585 588 1 611 618 587 591 2 614 622 589 594 3 592 597
tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 3 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - maximum permissible forward current vs. ambient temperature fig. 2 - relative radiant sensitivity vs. angular displacement fig. 3 - forward current vs. forward voltage fig. 4 - relative intensity vs. wavelength fig. 5 - relative luminous flux vs. forward current fig. 6 - change of dominant wavelength vs. forward current 0 10 20 30 40 50 60 0 20 40 60 80 100 120 t amb - ambient temperature (c) 16710-3 yellow i f - forward current (ma) 0.4 0.2 0 s rel - relative sensitivity 94 8351 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 ? - angular displacement 0 20 40 60 80 100 1.5 1.7 1.9 2.1 2.3 2.5 v f - forward voltage (v) 15974-3 f i - forward current (ma) yellow 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 - wavelength (nm) 16008 i v rel. - relative luminous intensity yellow 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 17018 i v rel - relative luminous intensity yellow - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 10 20 30 40 50 60 70 80 90 100 17019 - change of dom. wavelength (nm) d i f - forward current (ma) yellow
tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 4 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous inte nsity vs. ambient temperature fig. 8 - change of dominant wavelength vs. ambient temperature fig. 9 - change of forward voltage vs. ambient temperature 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17016 i v rel - relative luminous intensity yellow - 6 - 4 - 2 0 2 4 6 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17017 ? d - change of dom. wavelength (nm) yellow - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17015 v f - change of forward voltage (mv) 10 ma 30 ma 50 ma yellow
tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 5 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters reel fig. 10 - reel dimensions as12 = cathode leaves tape first as21 = anode leaves tape first tape fig. 11 - led in tape ? 5.8 0.15 1 min. 7.7 0.15 (5.1) 8.7 0.3 35.9 0.55 0.6 + 0.2 - 0.1 < 0.7 a c r2.49 (sphere) area not plane ? 5 0.15 2.54 nom. 0.5 + 0.15 - 0.05 specifications according to din technical drawings drawing-no.: 6.544-5259.04-4 issue: 8; 19.05.09 96 12125 0.5 + 0.15 - 0.05 identification label: 355 90 30 48 45 52 max. 948641 vishay/type/group/tape code/production code/quantity paper adhesive tape identification label reel tape diodes: anode before cathode phototransistors: emitter before collector code 21 diodes: cathode before anode phototransistors: collector before emitter code 12 94 8671
tlcy610. www.vishay.com vishay semiconductors rev. 1.3, 16-mar-15 6 document number: 81468 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ammopack fig. 12 - tape direction note ? the new nomenclature for ammopack is e.g. asz only, without suffix for the le d orientation. the carton box has to be turned to the desired position: + for anode first, or - for cathode first. as12z and as21z are still valid for already existing types, but not fo r new design. tape dimensions in millimeters option dim. h 0.5 mm as 17.3 tape feed c b a 94 8667-1 label 94 8172 quantity per: 1000 reel (mat.-no. 1764) 0.9 max. ? 4 0.2 6.35 0.7 12.7 0.2 5.08 0.7 12.7 1 2 1 0.3 0.2 12 0.3 9 0.5 2.54 + 0.6 - 0.1 measure limit over 20 index-holes: 1 18 + 1 - 0.5
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
